Video Safe Boarding of Vessels at Sea with GAC
published on 23 February 2022
Boarding a vessel at sea can be dangerous. By following simple rules, it can be done safely. This safety video shows you how to leave the launch boat and climb the ladder when boarding vessels at sea safely as well as boarding preparations, safety precautions and boarding under special conditions. The 3 types of boarding arrangements for pilot are also explained. Watch with sound on. Transfers are normally safe when everyone takes all the precautions. If you think it is unsafe, remember to...
Video Pilot Embarkation - Gangway Access - Unsafe Practice at Sea CHIRP Maritime Safety
published on 4 July 2019
The hazards of Pilot boarding
Throughout 2016, the International Maritime Pilots’ Association (IMPA) held a safety campaign focused upon the standard of pilot ladders and associated equipment. CHIRP supported this campaign and received many reports on the subject.
This first report describes issues concerning pilot access near
the non-parallel ends of a ship, and use of a retractable platform.
Video Emder Lotse IZURDIA DB8143 für KüMo RHEINTAL CQER7 IMO 9375903 Emden pilot for seabound coaster
published on 31 January 2021
Video Pilot Boarding Ship in Extreme Weather condition
published on 2 August 2021
Article Port of Ferrol (Spain) welcomes new pilot boat
by Baird Maritime - published on 2 December 2024
Article The scariest 15 minutes of my life
by Marine-Pilots.com - published on 14 August 2019
Video Pilot Boat Alongside Scarlet Lady Cruise Ship
published on 18 August 2021
From our deck 12 cabin balcony, some footage of the pilot boat coming alongside Virgin Voyages' cruise ship Scarlet Lady in the Solent between Portsmouth and the Isle of Wight. If you're expecting action and excitement then brace yourself for not quite that at all, but it is fairly impressive how close the pilot boat gets to the larger vessel, bouncing around on the waves. I did want to see the pilot leap from the ship to the boat but in truth got tired of waiting so if that's the bit...