IMPA has just released the results of the annual IMPA safety campaign, please have a look at the document. This year the non-compliances worldwide vary from 5% up to 70%....You can check your working area in the attachment.
SWR-120 is a multi-purpose, heavy-duty, high-speed planing boat for operation in costal sea areas, in open sea as a daughtercraft and in lakes and rivers in any climate zone
Port of Townsville latest Mantaray HM ORC 173, along with all Port of Townsville’s pilot boat fleet is defined by the Pantocarene designed beak bow vessels that are the forefront of pilot vessel desingn worldwide.
by Australian Maritime Safety Authority - published on 2 December 2021
AMSA: A pilot was seriously injured after losing balance when a large wave impacted the vessel at the same time as they stood up to remove their lifejacket while in the cabin.
by Mars report by Nautical Institute - published on 2 December 2021
Going down the accommodation ladder with neither lifevest nor safety line must have been based on similar, past, successful operations, which may have never been challenged on board. This ‘slippage’ in safety is a pernicious and common phenomenon.
by United Kingdom Maritime Pilots Association - published on 2 December 2021
OPERATIONAL NOTES AND RECOMMENDATIONS by UKMPA, February 2017
The introduction of modern lightweight Portable Pilot Units (PPU) for use during pilotage has proved to be another major advance for pilotage operations worldwide.
Register your pilot or embarkation ladder today and receive a free 30 months mandatory load test, when the ladders been delivered to one of our factories in Rotterdam, Singapore, New Castle UK or Houston Texas.
Due to many incidents involving pilot ladders and man ropes in South Australian ports, and in effort to improve pilot safety, from 1 January 2022 Flinders Ports will require visiting vessels and their Masters to take additional precautions
Conapra / Praticagem do Brasil have issued a notice “Common Errors in the pilot boarding arrangement “. In this notice, reference is made to international regulations ( Solas V Reg 23, IMO 1045 and ISO 799 ) as well as national regulations.